ACE SIP load-balancing in one-arm mode

Unanswered Question
Jul 27th, 2010
User Badges:


I'm trying to get SIP load-balancing to work in one-arm mode.

I configured source-nat and all services are working except for SIP.

I think I need sip inspection but I connot find a clear config exemple.

class-map match-any CM_Nu_SIP_VIP_5060
  description vip-sip
  2 match virtual-address udp eq 5060

policy-map type loadbalance sip first-match LB_POL_Nu_SIP_VIP
  class class-default
    sticky-serverfarm GRP-SIP

policy-map multi-match POL_SIP
  class CM_Nu_SIP_VIP_5060
    loadbalance vip inservice
    loadbalance policy LB_POL_Nu_SIP_VIP
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    nat dynamic 1 vlan 899

interface vlan 899
  nat-pool 1 netmask pat
  service-policy input POL_SIP

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Gilles Dufour Wed, 07/28/2010 - 04:04
User Badges:
  • Cisco Employee,

We do not support pat with SIP inspection.



This Discussion