PAP2T Capability

Unanswered Question
Jul 27th, 2010
User Badges:

Dears,


I'm thinking of buying a PAP2T for my home usage, but I have some questions:

  • It should be able to be configured to 2 different service providers (for incoming & outgoing calls)
  • I would like to plug only one phone which would function with the 2 lines provisionned:
    • so that this phone receives all calls from the 2 service providers.
    • so that I could route calls from the only phone based on number analysis either to one or to the other service provider.


Thanks for your feedback,


JMS

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
nseto Mon, 08/02/2010 - 10:44
User Badges:
  • Silver, 250 points or more

You can have two different service providers, one for line 1 and another for line 2.

There's no auto forward from one line to the other but you can setup the call forward say from line 2 to line 1.  In the call forward, you'd put something like the [email protected]:port-number of line 1 in the call forward all setting of line 2 (in user 2 tab) so that the calls from line 2 goes to line 1.

jeanmarc.salsa Tue, 08/03/2010 - 00:52
User Badges:

Thanks !


May I ask aslo for outgoing calls ? Is it possible to apply a call pattern scenario to decide which line to choose (so that Phone 1 could use Line 2 for instance) ?


Many Thanks again !

nseto Tue, 08/03/2010 - 08:57
User Badges:
  • Silver, 250 points or more

This model isn't designed to allow for that.

Our PBX (spa9000) is designed to do what you've described.

Actions

This Discussion

Related Content