07-27-2010 02:14 PM - edited 03-06-2019 12:13 PM
I want to enable QOS across my campus network. I need to prioritize traffic for video and voice. I have a mix of 3500/3550/3560 at L2 and 6513 w/SUP720 (12.2-33SXI1) at L3. From what I have been able to read at layer 2 I can use auto qos, but what option should I use, cisco-phone,cisco-softphone or trust). I believe I should use trust, but I am not sure. Most of my video codex have a DSCP setting of 46. I was told that my QOS also needs to support TOS 5 or DSCP EF.
What I havent been able to determine is what QOS settings I need on the 6513, to support these requirements. Can someone point me in the right directions?
Thank you
mike
Solved! Go to Solution.
07-27-2010 02:39 PM
Hi Mike,
Refer to this document for QOS design concept in the campus
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html
HTH
Reza
07-27-2010 02:39 PM
Hi Mike,
Refer to this document for QOS design concept in the campus
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html
HTH
Reza
07-28-2010 05:47 AM
Thank you, that is what I needed.
Mike
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: