cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
985
Views
0
Helpful
2
Replies

QOS 6513

I want to enable QOS across my campus network.  I need to prioritize traffic for video and voice.  I have a mix of 3500/3550/3560 at L2 and 6513  w/SUP720 (12.2-33SXI1) at L3. From what I have been able to read at layer 2 I can use auto qos, but what option should I use, cisco-phone,cisco-softphone or trust).  I believe I should use trust, but I am not sure.  Most of my video codex have a DSCP setting of 46.  I was told that my QOS also needs to support TOS 5 or DSCP EF.

  What I havent been able to determine is what QOS settings I need on the 6513, to support these requirements.  Can someone point me in the right directions?

Thank you

mike

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame
2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hi Mike,

Refer to this document for QOS design concept in the campus

http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html

HTH

Reza

Thank you, that is what I needed.

Mike

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: