Can I convert Lightweight AP to Autonomous?

Answered Question
Jul 27th, 2010

Hi Folks!

The question is, I have a AIR-AP1131AG-x-K9 and I want install this equipment without a WLC in a branch office.

Can I convert IOS LWAPP to autonomous system? I found how I can do the opposite, so I ask help to solve this problem.

Thanks a lot!

Hector Barbosa

I have this problem too.
0 votes
Correct Answer by Leo Laohoo about 6 years 5 months ago

I have a AIR-AP1131AG-x-K9 and I want install this equipment without a WLC in a branch office.

You can enable H-REAP.

 Can I convert IOS LWAPP to autonomous system?

Yes.  Follow the link below and use the guide "Using a TFTP Server to Return to a Previous Release"

http://www.cisco.com/en/US/customer/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Please don't forget to rate our posts.  Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
Correct Answer
Leo Laohoo Tue, 07/27/2010 - 14:40

I have a AIR-AP1131AG-x-K9 and I want install this equipment without a WLC in a branch office.

You can enable H-REAP.

 Can I convert IOS LWAPP to autonomous system?

Yes.  Follow the link below and use the guide "Using a TFTP Server to Return to a Previous Release"

http://www.cisco.com/en/US/customer/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Please don't forget to rate our posts.  Thanks.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode