cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3809
Views
4
Helpful
1
Replies

Can I convert Lightweight AP to Autonomous?

Hi Folks!

The question is, I have a AIR-AP1131AG-x-K9 and I want install this equipment without a WLC in a branch office.

Can I convert IOS LWAPP to autonomous system? I found how I can do the opposite, so I ask help to solve this problem.

Thanks a lot!

Hector Barbosa

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame

I have a AIR-AP1131AG-x-K9 and I want install this equipment without a WLC in a branch office.

You can enable H-REAP.

 Can I convert IOS LWAPP to autonomous system?

Yes.  Follow the link below and use the guide "Using a TFTP Server to Return to a Previous Release"

http://www.cisco.com/en/US/customer/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Please don't forget to rate our posts.  Thanks.

View solution in original post

1 Reply 1

Leo Laohoo
Hall of Fame
Hall of Fame

I have a AIR-AP1131AG-x-K9 and I want install this equipment without a WLC in a branch office.

You can enable H-REAP.

 Can I convert IOS LWAPP to autonomous system?

Yes.  Follow the link below and use the guide "Using a TFTP Server to Return to a Previous Release"

http://www.cisco.com/en/US/customer/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Please don't forget to rate our posts.  Thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card