Unity 7 Backup Subscriber Server - Live Reply not working

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Hills Mon, 08/02/2010 - 06:44
User Badges:
  • Cisco Employee,

Hello,


I am looking at the guide for this and found the following:


http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/5x/networking/guide/ex/5xcunet030e.html#wp1050502



Enabling Cross-Server Live Reply and Entering the Pilot Numbers of Destination Cisco Unity Servers

Do the following procedure on each Cisco Unity server in the dialing  domain. If the system is using failover, do the following procedure on  both the primary and secondary server, because most of the settings on  the Network > Dialing Domain Options page are stored in the registry.  (Registry settings are not replicated to the secondary server.)

To Enable Cross-Server Live Reply and to Enter the Pilot Numbers of Destination Cisco Unity Servers




You might just verify this has been done on the Secondary also.



Thanks,



Scott

Actions

This Discussion