Configuring a Hotline Extension

Unanswered Question
Brandon Buffin Wed, 07/28/2010 - 11:40
User Badges:
  • Purple, 4500 points or more

Rodney,

     I don't know if CCA can do this, but it is a fairly simple CLI change.



ephone-dn 1

number 1111

trunk 2222


ephone 1

button 1:1



When ephone 1 goes off hook, it will dial, 2222.


Hope this helps.


Brandon

Brandon Buffin Wed, 07/28/2010 - 13:45
User Badges:
  • Purple, 4500 points or more

Yes. Usually, the analog ephone-dns are the first few in the config. You should also have a corresponding ephone with "type anl". The "button 1:x" command under this ephone will tell you the ephone-dn number.


Hope this helps.


Brandon

Anna Tsukerman Wed, 07/28/2010 - 13:53
User Badges:

Hi Rodney,


CCA currently does not support this feature. I'm tracking CCA feature requests, and will add this to the list to be considered for one of the future releases.


Thank you,

Anna

vcappucc Sat, 07/31/2010 - 10:01
User Badges:
  • Bronze, 100 points or more

Hello,


Have you also considered using a PLAR in the FXS Voice Port?


The connection plar command under the fxs voice-port (show voice-port summ) can allow you to create a switched Voice over IP (VoIP) call without any digit dialing, this URL http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00800942a5.shtml should be useful


Thank you

Victor.-

Actions

This Discussion