ACS 5.1 NTP shows init not associated

Unanswered Question
Jul 28th, 2010
User Badges:
  • Bronze, 100 points or more

Wondering why my ACS 5.1.0.44.3 is showing init for NTP instead of associated.


acs/admin# show run

clock timezone US/Eastern
!
ntp server 130.126.244.44


acs/admin# show ntp
Primary NTP   : 130.126.244.44


synchronised to local net at stratum 11
   time correct to within 12 ms
   polling server every 1024 s


     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
*127.127.1.0     LOCAL(0)        10 l   14   64  377    0.000    0.000   0.002
130.126.244.44  .INIT.          16 u    - 1024    0    0.000    0.000 4000.00



Warning: Output results may conflict during periods of changing synchronization.


acs/admin#

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Thu, 07/29/2010 - 00:16
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Wondering why my ACS 5.1.0.44.3 is showing init for NTP instead of associated.


acs/admin# show run

clock timezone US/Eastern
!
ntp server 130.126.244.44


acs/admin# show ntp
Primary NTP   : 130.126.244.44


synchronised to local net at stratum 11
   time correct to within 12 ms
   polling server every 1024 s


     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
*127.127.1.0     LOCAL(0)        10 l   14   64  377    0.000    0.000   0.002
130.126.244.44  .INIT.          16 u    - 1024    0    0.000    0.000 4000.00



Warning: Output results may conflict during periods of changing synchronization.


acs/admin#


Try restaring the services of ACS and check the status of the ntp sync.


Hope to Help !!


Ganesh.H

Actions

This Discussion