Aironet 1240AG connected to Catalyst 3560

Unanswered Question
Jul 28th, 2010
User Badges:

I recently got an Aironet 1240AGs that is connecting to a catalyst 3560 switche (layer 3 switche). I have DHCP on a Windows 2003 server. The native vlan on the Aironet gets a DHCP address from the Windows 2003 server and assigns it to the wireless clients. However, clients on different SSID's on different VLANs do not pick up a DHCP address. The same VLANs on the switches work fine with the helper address configured. I tried assigning helper address on the fast ethernet sub interface for each VLAN on the aironet but it did not help. Can anyone point me in the right direction?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Leo Laohoo Wed, 07/28/2010 - 15:48
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

And you have 2 DHCP scopes:  One for VLAN 1 and another for VLAN 40?  Is this right?


This Discussion

Related Content



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode