CUCM 6.1(3) Called party through translation pattern

glenn.martindell · ‎07-29-2010

Hello,

I'm trying to get called party name information on a call through a translation pattern. Calling party comes through fine on the called phone. I have my calling line, calling name, connected line and connected name all set to "allowed" in the translation pattern Is there a parameter I need to change somewhere that I'm forgetting?

Thanks,

Glenn

Jason Wiatr · ‎07-29-2010

Hi Glenn,

Can you provide a little more detail, perhaps a sample call flow.

ex.

IP Phone A --> 1000

IP Phone B --> 2000

A dials 9000 --> translation pattern 9000 is used to change the called number to 2000 --> B rings

While B is ringing the called party number of 9000 is displayed as the called party number on A

When B answers the called party changes to 2000

glenn.martindell · ‎07-29-2010

You pretty much have it correct:

Phone A DN 221000

Phone B DN 221001

Translation pattern 1001 translates to 221001

When phone A dials 1001, phone B rings. Phone B sees calling name of Phone A but Phone A only sees “1001” I need for Phone A to see the called party name of Phone B. I’m basically trying use digit expansion by allowing the user to dial a 4 digit number to reach a 6 digit DN

Jason Wiatr · ‎07-29-2010

What's the exact version of CUCM that your running?

I'm running 6.1.4.1000-10 and have the following set up and and working.

IP Phone A --> 221000

IP Phone B --> 221001

Translation patter 1001 that prefixes 22

A dials 1001

called party number of 1001 is displayed for a split second (on A) then it changes to 221001 as soon as B starts ringing

when the call is connected A displays a called party number of 221001

glenn.martindell · ‎07-29-2010

It called name I'm trying to get working.

Jason Wiatr · ‎07-29-2010

I was able to get this to work by setting the alerting name and ASCII Alerting Name on the 221001

IP Phone A --> 221000

IP Phone B --> 221001

(alerting name and ASCII Alerting Name --> Test Alerting Name)

(Display (Internal Caller ID) and ASCII Display (Internal Caller ID) --> Caller ID)

Translation patter 1001 that prefixes 22

A dials 1001

called party number of 1001 is displayed for a split second (on A) then it changes to "to Test Alerting Name (221001)" as soon as B starts ringing

when the call is connected A displays "to Caller ID (221001)"