WLC 5508 and Client IP addresses

Answered Question
Jul 29th, 2010

we have installed our first 5508 in a small remote office.  I setup a DHCP range on the 5508 to give the AP's a IP address.  After that I changed the AP's to have static IP address.  I wish for the wireless clients to use our DHCP servers here at the home office, so I shut down the DHCP service on the 5508.  Now the Clients will not get an IP address.  So now I re-enable the scope and the clients get an IP address.  How do I configure the 5508 so that the wireless clients will get an IP address from our DHCP servers and not the 5508?

Correct Answer by Leo Laohoo about 6 years 6 months ago

Go to WLAN > click the SSID of your choice > Advanced tab > click on "DHCP Server" and enter the DHCP Server.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Leo Laohoo Thu, 07/29/2010 - 16:19

Go to WLAN > click the SSID of your choice > Advanced tab > click on "DHCP Server" and enter the DHCP Server.

Actions

This Discussion

 

 

Trending Topics - Security & Network