07-29-2010 02:31 PM - edited 03-14-2019 06:11 AM
I am running IPCC Express 5.0(2)SR03_Build317. When I click on subsystems RmCM, the screen comes up with a white blank screen (on any laptop, server, etc). This feels like some kind of bug. To edit RmCm, I have to go through the wizard. It is very annoying. Has anyone seen this or know the fix to this error? Thanks for any information.
Rob Horrigan
Solved! Go to Solution.
07-29-2010 04:07 PM
Hi Robert,
How many CCM Servers do you have listed in appadmin under the Unified CM Configuration for Unified CM Telephony Subsystem and for RmCm Subsystem for the Selected CTI Manager side? If you have more than 2 on the Selected CTI Manager side I have seen this (yes it was a defect) to cause the blank screen issue like you are experiencing. Only 2 is supported. Anything more than 2 listed there can cause issues.
Please let me know if this was helpful and if it was please rate this highly. Otherwise let me know what you find.
07-29-2010 04:07 PM
Hi Robert,
How many CCM Servers do you have listed in appadmin under the Unified CM Configuration for Unified CM Telephony Subsystem and for RmCm Subsystem for the Selected CTI Manager side? If you have more than 2 on the Selected CTI Manager side I have seen this (yes it was a defect) to cause the blank screen issue like you are experiencing. Only 2 is supported. Anything more than 2 listed there can cause issues.
Please let me know if this was helpful and if it was please rate this highly. Otherwise let me know what you find.
07-29-2010 06:42 PM
Michael,
That was it. Thanks a lot. 5 rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide