07-29-2010 10:59 PM - edited 03-03-2019 06:01 AM
hi,
i try load the new IOS C1841-ADVENTERPRISEK9-MZ.124-24.T3.bin to C1841 ISR. Everything seems fine about the setting on the rommon, but once it y copy to almost 70% my TFTP prompt operation aborted: timeout.
i check the log of my TFTP applicatin, showing "dropped because peer didn't respond", during the copy process i doing ping -t test, once it timeout , the router interface also showing timeout.
my topology is direct connection, using a crossover cable. default gateway is using router interface IP.
anyone can help? would it be anything deal wit the IOS i download?
thank you
Noel
07-29-2010 11:08 PM
Are you using TFTP32 as a client?
07-29-2010 11:11 PM
07-29-2010 11:28 PM
Anyway, anyone know what's the meaning of "ACK block 0 ignore" mean?
then it hold and timeout occur
thank you
08-01-2010 03:51 PM
Try uisng TFTP32.
08-02-2010 12:19 PM
Hello,
Most of the older TFTP servers do not support file size greater than 16 MB. TFTPd32 is one of the TFTP server implementations that supports file size greater than 16 MB. You can download TFTPd32 here:
The symptoms you are explaining seems more like the issue with the TFTP server not supporting bigger images. So, please try using TFTPd32 and see if that helps.
Regards,
NT
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide