Connecting two local networks

Unanswered Question
Jul 30th, 2010
User Badges:

We have two offices a couple of miles apart connected via a 10MB Ethernet link provided by Virgin Media Business for the purposes of business continuity replication. Office A is on a 192.168.10.0/24 network and Office B is on a 192.168.17.0/24 network. I want to connect the two networks, but cannot change their IP addresses or subnet mask as there is a MPLS cloud in place already for standard network traffic.

We have a Cisco RVS4000 router lying about, however I don’t seem to be able to get the routing working between the two networks. Is this possible with this device, or should I be looking at something like an 800 series router?

Many thank.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Nagaraja Thanthry Fri, 07/30/2010 - 07:04
User Badges:
  • Cisco Employee,

Hello,


I do not think RVS400 would be a best fit in your environment. You will need a router that can route traffic between two subnets. If you are not worried about full connectivity between the two subnets, then you can buy a simpler Linksys Home Router and put it between the subnets. But if you are looking for full connectivity, then I would suggest at least a 800 series router.


Hope this helps.


Regards,


NT

Actions

This Discussion