07-30-2010 05:39 AM - edited 03-16-2019 12:00 AM
Can you tell me if VWIC2-1MFT-T1/E1 is compatible with standard ITU-T G.703?
I've got router 2821 with PVDM2-32
Thanks
Solved! Go to Solution.
07-30-2010 06:42 AM
Hello,
I suppose your VWIC2-1MFT-T1/E1 card is intended to be used in your 2800 voice gateway for external pstn calls. You can ask to your provider to get an E1-PRI (if in Europe) access for your voice calls. Also in function of your call volume, you can even ask to get only E1 partial channels activated (for example 15 instead of the 30 voice channels).
Best regards
Karim
07-30-2010 06:03 AM
Hello Bagnolini;
According to table-2 of this link, NO :http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html
You have to get VWIC2-1MFT-G703 (or VWIC2-2MFT-G703) module which supports G.703 (unstructured E1).
Regards.
Karim
07-30-2010 06:26 AM
Ok, what standard I have to ask to my provider?
07-30-2010 06:42 AM
Hello,
I suppose your VWIC2-1MFT-T1/E1 card is intended to be used in your 2800 voice gateway for external pstn calls. You can ask to your provider to get an E1-PRI (if in Europe) access for your voice calls. Also in function of your call volume, you can even ask to get only E1 partial channels activated (for example 15 instead of the 30 voice channels).
Best regards
Karim
09-01-2010 06:02 AM
Can you give me a simple example for configure this kind of card?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: