I have downloaded and updated the firmware in my RVS4000 as
well as the Quick VPN client software to the latest versions ( July 2010 ).
Test client is an old laptop running XP SP3. Connection is wireless to Qwest DSL. Local address is 192.168.1.104 Outside address 67.41.38.xxx
RVS4000 is on CableOne network with outside address of 96.18.153.xxx. Inside addresses are 192.168.20.1, 192.168.10.1 and 192.168.11.1 on respective VLANS.
RVS4000 client is guest with password of guest ( high security! )
When I try to connect from the remote client, I get to verifying network and then the error box... at this point the RVS4000 shows the connection is online.
There is no connection on the client shown on either the networks screen and no routes are shown in the "router print" DOS command to the RVS4000 inside networks. Of course I can not ping any of the inside addresses on the RVS4000... hence the error.
Any suggestions on the next step in resolving this issue. I would like to get back to my home net when out and about with the laptop.
I have tried disabling firewall and/or anti-virus programs on the client and firewall and IPS on the RVS4000 with not change in result.