New to ASA - Cable Modem IWth Static Ip Question

Unanswered Question

H

ello everyone,


My friend's small medical building's firewall guy got sick and is in the hospital.  They moved into a new building and thy have a brand new Cisco 5505 unlimited license.  They have Time Warner Biz Class 35meg down/10 up with a cable modem and 5 static ips.


I was trying t oconfigure this for them because biz is opening Monday.  I set the inside interface on vlan1 with ip address 192.168.10.1 and the outside interface on e0/0 with one of the static ips.  i also set a route for 0.0.0.0 0.0.0.0 outside interface 1.


i can ping external ips form the asa but i cannot get out to the internet from th einside network ( workstations etc.).  Do i need to nat/pat or both?  also can someone help me with the correct commands?  i am researching as we speak.


thanks for any iinput.


Bob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Nagaraja Thanthry Sat, 07/31/2010 - 08:38
User Badges:
  • Cisco Employee,

Hello,


To start, please try the following commands:


int vlan 2

nameif outside

security-level 0

ip address


access-group outside_access_in in interface outside


Hope this helps.


Regards,


NT

Nagaraja Thanthry Sat, 07/31/2010 - 08:46
User Badges:
  • Cisco Employee,

Hello,


Yu are right. You need to setup NAT. The commands I included in my earlier

post (global/NAT) achieve the same.


Hope this helps.


Regards,


NT

Nagaraja Thanthry Sat, 07/31/2010 - 12:52
User Badges:
  • Cisco Employee,

Hello,


Please try the following:


no nat (inside,outside) source dynamic any interface


object network LAN

subnet 192.168.10.0 255.255.255.0

nat (inside,outside) dynamic interface dns


Hope this helps.


Regards,


NT

Actions

This Discussion