cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4412
Views
0
Helpful
3
Replies

SRP527W Setup Problem

GordonHunter
Level 1
Level 1

I have a Small Business Pro SRP527W (Firmware 1.01.9) which I am connecting to an ADSL service.  I can get this working using the Quick Setup links, reserving IP addresses for my servers and configuring port forwading but there does not appear to be a link for changing the default password.  Every time I log in I am greeted with the Platform Setup Wizard.  If I run this wizard the router stops working, in that I can no longer access my websites, FTP site or remote desktop (they are still shown in the port forward list and still shown as enabled).

Anybody got any ideas?  Either how to change the default password without using the wizard or how to disable the wizard.

Thanks,

Brian.

1 Accepted Solution

Accepted Solutions

Oldhat_NZ
Level 1
Level 1

Hi Brian,

You probably struck a similar problem as myself.

An earlier post https://supportforums.cisco.com/message/3113918#3113918 advises logging in as admin/admin and this will allow access to the feature you are missing as well as a few more.

HTH

View solution in original post

3 Replies 3

Oldhat_NZ
Level 1
Level 1

Hi Brian,

You probably struck a similar problem as myself.

An earlier post https://supportforums.cisco.com/message/3113918#3113918 advises logging in as admin/admin and this will allow access to the feature you are missing as well as a few more.

HTH

Perfect!

I did not appreciate that there was a default admin account aswell. Default passwords now changed and I now feel that little bit more secure.

Thanks,

Brian.

Glad you sorted this Brian,

We plan to update the Quick Start Guide shortly to better highlight the admin log-in role.

Regards,

Andy

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: