IDSM-2 in coreswitch

Unanswered Question
Aug 1st, 2010
User Badges:

I have IDSM-2 in coreswitch with the following details


                                                Gi1/2 -[Coreswitch with IDSM-2]-Gi9/1


Below is configuration in coreswtch , i want to put IDSM-2 in INLINE mode




interface GigabitEthernet1/2


description **** Uplink to Firewall ****

ip address 10.1.2.73 255.255.255.248

ip ospf network point-to-point

standby 1 ip 10.1.2.75

standby 1 priority 110

standby 1 preempt

!

interface GigabitEthernet1/2.11

encapsulation dot1Q 211

ip vrf forwarding VRF11

ip address 10.2.11.73 255.255.255.248

ip ospf network point-to-point

standby 1 ip 10.2.11.75

standby 1 priority 110

standby 1 preempt

!

interface GigabitEthernet1/2.12

description **** Connected to INFRASOFT TECH - VLAN 12  ****

encapsulation dot1Q 212

ip vrf forwarding VRF12

ip address 10.2.12.73 255.255.255.248

ip ospf network point-to-point

standby 1 ip 10.2.12.75

standby 1 priority 110

standby 1 preempt



interface TenGigabitEthernet9/1

description **** Downlink to Distribution ****

ip address 10.1.2.2 255.255.255.252

ip ospf network point-to-point

rmon collection history 62 owner campusmanager buckets 10 interval 300

!


interface TenGigabitEthernet9/1.11

encapsulation dot1Q 311

ip vrf forwarding VRF11

ip address 10.2.11.2 255.255.255.252

|

interface TenGigabitEthernet9/1.12

encapsulation dot1Q 312

ip vrf forwarding VRF12

ip address 10.2.12.2 255.255.255.252

ip ospf network point-to-point

!


i want to pass all the traffic to pass through IDSM-2 module.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion