08-02-2010 09:19 PM - edited 03-06-2019 12:16 PM
Hi,
I want to know can I telnet from R3-loopback interface to PC1 Router.
like we are use ping 10.1.1.1 source 1.1.1.1 then ping is ok.
same thing I want to know telnet to 10.1.1.1 but source from 1.1.1.1 how I can??
Solved! Go to Solution.
08-02-2010 09:21 PM
ip telnet source-interface
08-02-2010 09:22 PM
08-02-2010 09:25 PM
Hello,
Router#telnet
for example:
Router#telnet 10.1.1.1 /source-interface loopback 0
Hope this helps.
Regards,
NT
08-03-2010 03:52 AM
As the previous posts show there are 2 ways that you can specify the address to be used for telnet from an IOS device. If you want that the telenet source address will always be the specified address then you should use the configuration option of:
ip telnet source-interface
and if you want that the telnet source address be controlled only for this telnet then you should use the command line option of:
telnet 10.1.1.1 /source-interface loopback 0
So the way to do it depends on whether you want a permanent change or control just for a particular telnet session.
HTH
Rick
08-02-2010 09:21 PM
ip telnet source-interface
08-02-2010 09:22 PM
Hi,
telnet 10.1.1.1 /source-interface loopback x
JayaKrishna
08-02-2010 09:25 PM
Hello,
Router#telnet
for example:
Router#telnet 10.1.1.1 /source-interface loopback 0
Hope this helps.
Regards,
NT
08-03-2010 03:52 AM
As the previous posts show there are 2 ways that you can specify the address to be used for telnet from an IOS device. If you want that the telenet source address will always be the specified address then you should use the configuration option of:
ip telnet source-interface
and if you want that the telnet source address be controlled only for this telnet then you should use the command line option of:
telnet 10.1.1.1 /source-interface loopback 0
So the way to do it depends on whether you want a permanent change or control just for a particular telnet session.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide