Replacing a failed controller

Unanswered Question
Aug 3rd, 2010
User Badges:


Could anyone advise me on the easiest way of replacing a failed controller with a new one.

Should include easiest method of pushing config to controller from WCS etc.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jeffrey Keown Tue, 08/10/2010 - 12:14
User Badges:
  • Cisco Employee,

Hi Lee,

If you're replacing it with the same type of controller, you can upload the config via the controller's gui (if it's still useable).

commands -> upload file -> config

Once you have ip connectivity to the new one, do the reverse of the process to apply the config


This Discussion