cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1265
Views
0
Helpful
3
Replies

Second line ring on cucm 7.1

Chris Plesco
Level 1
Level 1

Hi Everyone,

I just migrated from ccm 4.1 to 7.1 and am learning there are a few differences.  Do you know if I should be able to have a second ring?  Any dn on the second line appearance does not seem to ring.  If this is the case, then what is the use of having a 2 line phone?

Thanks for your help

Chris

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Chris,

Yes, this should be most possible

Have a look at the second line on one of the non-functioning phones and

check the (under DN config page);

Ring Setting (Phone Idle) =

Ring Setting (Phone Active) =

Let us know what those are set as.

Cheers!

Rob

View solution in original post

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Chris,

Yes, this should be most possible

Have a look at the second line on one of the non-functioning phones and

check the (under DN config page);

Ring Setting (Phone Idle) =

Ring Setting (Phone Active) =

Let us know what those are set as.

Cheers!

Rob

Hi Rob,

Thanks for letting me know it was possible.  I just found i had the phone in the wrong partition. 

Thanks a ton!

Chris

Hey Chris,

You are always welcome my friend Not much help, but I'm glad

you got this sorted ...great work!

Cheers!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: