08-03-2010 03:49 PM - edited 03-06-2019 12:18 PM
Hi All,
If the master switch in one 3750G stack failed, which slave will take control? Does the slave inherit all the settings from master?
Thanks a lot.
Lou
Solved! Go to Solution.
08-03-2010 04:02 PM
Hello,
When the current master goes down, the slave switch will takeover the master
role and inherit all the settings from the master. Here is a document that
explains the master election. If all other parameters remain same, the
switch with lowest MAC ID will be selected as master.
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuratio
n_example09186a00807811ad.shtml#election
Hope this helps.
Regards,
NT
08-03-2010 04:02 PM
Hello,
When the current master goes down, the slave switch will takeover the master
role and inherit all the settings from the master. Here is a document that
explains the master election. If all other parameters remain same, the
switch with lowest MAC ID will be selected as master.
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuratio
n_example09186a00807811ad.shtml#election
Hope this helps.
Regards,
NT
08-04-2010 05:45 AM
Thanks a lot! It's helpful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide