Solved: Cisco Nexus 5010

goransh_pc · ‎08-03-2010

I saw a Cisco Nexus 5010 and it has 5 RJ-45 port, 1 for Console, 2 for MGMT and another two port for what ??? L1 and L2, somebody can explain me that ?? Thank yuo so much !!!

Jayakrishna Mada · ‎08-03-2010

Konus,

The defect id is to document that the ports are not usable, this was not documented. ( did not intend to confuse you).

The first 8 ports on 5010 can be used to as 1 gig ports with GLC-T= transceiver.

JayaKrishna

View solution in original post

Jayakrishna Mada · ‎08-03-2010

Hi ,

Only one port works our of those 4 ports. L1/L2/MGMT1 are not usable yet and will be used in future. A document defect is opened to document this. Defect id: CSCth37349

Hope that answers your question.

JayaKrishna

goransh_pc · ‎08-03-2010

Thank you so much for your quick feedback JayaKrishna, but right now I'm more confused than before:

Waht is a Defect ID: CSCth37349 ?

All usable ports on that switch (Nexus) are SFP, is there any adapter that permits to connect NIC server or NIC pc to the Nexus through RJ-45 and UTP cable?

Thank you so much

Jayakrishna Mada · ‎08-03-2010

Konus,

The defect id is to document that the ports are not usable, this was not documented. ( did not intend to confuse you).

The first 8 ports on 5010 can be used to as 1 gig ports with GLC-T= transceiver.

JayaKrishna

goransh_pc · ‎08-03-2010

Thank you So Much Jaya.