I got a trouble when configure Sync-E on this Cisco Devices.
Topo1: Cisco7600 --- MWR1
This Topo is working fine because we can configure interface gigabit ethernet on Cisco 7600 as a Sync-E source with this command:
interface GigabitEthernet 3/1
clock source internal
On MWR we use this command: network-clock-select 1 Sync 0
Topo2: Cisco 7600 --- MWR1 ---- MWR2
Configuration on 7600 and MWR1 are the same as Topo1 but the port to connect to MWR2 on MWR1 we can not configure it to transmit Sync-E like 7600.
Please help me to find out the trouble!
Thanks a lot,
Do Thanh Son