Both radios useable for bridge connection

Answered Question
Aug 4th, 2010

Hi,


I have 2 1242 Accesspoints.


1 is the Root Bridge and the other the Nonrootbridge.


My question is can i use both radios for the link?


At the moment it works only with one radio.

It works with both g od. a Standart but not with both together.


If i turn on the second radio i have no connection.



best regard Dieter

Correct Answer by Leo Laohoo about 6 years 6 months ago
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Dieter Prinesdoma Thu, 08/05/2010 - 01:05

Thanks for your answer.


Hope you could help me with the configs.

I think it is a problem with the bridge-groups but i have no idea to solve this.


This is my root Bridge Config.


no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname root
!
enable secret 5 $1$XYrB$xov2WG/kNnnH1ldFMJEHz.
!
no aaa new-model
!
!
dot11 syslog
!
dot11 ssid test
   authentication open
   authentication key-management wpa version 2
   wpa-psk ascii 7 071B245F5A1D1C1603
!
power inline negotiation prestandard source
!
!
username Cisco password 7 062506324F41
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid test
!
channel 2412
station-role root bridge
bridge-group 1
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid test
!
no dfs band block
channel dfs
station-role root bridge
bridge-group 1
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.0.1 255.255.255.0
no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
!
end


And this the Non-Root Bridge:


no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname non-root
!
enable secret 5 $1$LSB2$q0iBDYt3eciyALsil0yf50
!
no aaa new-model
!
!
dot11 syslog
!
dot11 ssid test
   authentication open
   authentication key-management wpa version 2
   infrastructure-ssid optional
   wpa-psk ascii 7 131112011F1801393F
!        
!
!
username Cisco password 7 062506324F41
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
shutdown
!
encryption mode ciphers aes-ccm
!
ssid test
!
station-role non-root bridge
bridge-group 1
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid test
!
station-role non-root bridge
bridge-group 1
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.0.2 255.255.255.0
no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
!
end



best regards Dieter

Actions

This Discussion