cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
940
Views
5
Helpful
5
Replies

IPMA PopUp

Hi guys

Is possible to configure or remove the popup on ip phone assistant? On CUCM 5.x the assisant tell me that the popup on ip phone aren't showed. Now on 7.1.5 the popup is show! Is possible to configure to no show?

Regards

Peterson

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Peterson/Johan,

I think the two settings that may be causing this for the Assistant are

CallPLaneOverWrite

Toggles between Enabled and Disabled. Change the setting of this field by
highlighting the field and pressing Select. Enabling this flag sends real-time
updates while you are on a call.

StpUpdt/StrUpdt

The Manager Status screen, by default, refreshes when a change in a manager’s
status occurs or when there is a new call for a manager.
The StpUpdt button prevents this automatic refresh.
You might use this button, for example, if you have 33 managers you are
supporting and would like to change the setting for the 20th manager.
You would scroll down the manager list on the Manager Status screen, highlight
the 20th name, and press Select.
However, if your screen gets updated during this time, you would lose your place
in the scroll list, as well as miss potentially important status updates. Therefore,
to avoid refreshes from occurring in such a situation, press the StpUpdt button.


Note To re-invoke the automatic updates, press the StrUpdt button.


https://www.cisco.com/en/US/docs/voice_ip_comm/cucma/7_1_2/english/user/guide/ipma_assts.pdf


Cheers!
Rob

View solution in original post

5 Replies 5

johan.volschenk
Level 1
Level 1

I’m experiencing the same issue on 7.1.3 and would also like to know how to fix/disable the popup?

Many thanks

Johan

I have the same issue on 9.1, 

Anybody can helpme?

Rob Huffman
Hall of Fame
Hall of Fame

Hi Peterson/Johan,

I think the two settings that may be causing this for the Assistant are

CallPLaneOverWrite

Toggles between Enabled and Disabled. Change the setting of this field by
highlighting the field and pressing Select. Enabling this flag sends real-time
updates while you are on a call.

StpUpdt/StrUpdt

The Manager Status screen, by default, refreshes when a change in a manager’s
status occurs or when there is a new call for a manager.
The StpUpdt button prevents this automatic refresh.
You might use this button, for example, if you have 33 managers you are
supporting and would like to change the setting for the 20th manager.
You would scroll down the manager list on the Manager Status screen, highlight
the 20th name, and press Select.
However, if your screen gets updated during this time, you would lose your place
in the scroll list, as well as miss potentially important status updates. Therefore,
to avoid refreshes from occurring in such a situation, press the StpUpdt button.


Note To re-invoke the automatic updates, press the StrUpdt button.


https://www.cisco.com/en/US/docs/voice_ip_comm/cucma/7_1_2/english/user/guide/ipma_assts.pdf


Cheers!
Rob

Thanks so much, it seems to have resolve the popups.

Hi Rob.

Thanks for your reply. The POPUP was remove!

Regards

Peterson

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: