I have a single network 192.168.1.0, now I want to create VLANs
Following VLANs need to be created
Servers - 192.168.1.0
Desktop - 192.168.2.0
Other - 192.168.3.0
I want desktop and other VLAN to connect to internet using 192.168.1.1 gateway, how do i configure VLAN.
Also, I want to make sure that my WSUS and EPO server is able to update all machines in the network.
I have 2 Linksys SRW2024 switche and 2 Linksys SRW2024P switch.
Thanks in advance!
The operative word being...IF...nothing in the online docuementation indicates anything other than a layer 2 switch.
Based on what you have given as your current hardware, You will not be able to create the environment you want.
The switches appear to support vlans, but you don't have anything that will route. I cannot speak to the capabilites
of the sonicwall, but I'm assuming it is essentially a 2 port device, inside for the user domain, outside for the internet,
possibly 3 (DMZ). At any rate I doubt that it is capable of routing.
Switch user guides are a good start. there is a chapter in the link below that discusses VLAN Creation it does cover your switch model