08-04-2010 07:37 PM - edited 03-19-2019 01:21 AM
CUCM 8.0(3)
CUPS 8.0(2)
CUPC 8.0.1
MPX 2.1.1.2
We are having trouble with video conferencing 3 people together ad-hoc in CUPC 8. We can get 2 way video/audio with 2 people, but when conferencing in the third person, it goes to audio only. We have an MPX ad-hoc conference bridge registered to CUCM. The MRG/MRGL contains this conf bridge and is assigned to all phones. I've seen multiple documents, including the CUPC 8 Datasheet, say that MPX VT2.0 is one of the requirements for Video Conferencing in CUPC 8. MPX-standard is not listed.
Example:
Video conferencing | Required for impromptu video conferencing: • Cisco Unified Videoconferencing 5.7, 7.0, or 7.1 |
I assume that's not accurate, based on other posts.
What are we missing here?
08-04-2010 07:50 PM
MPX and MPX VT use the same installation DVD but two installation options.
For video conferencing, you need to install MPX VT, not MPX.
Michael
08-04-2010 08:00 PM
Is that to say MP 8 would fix this issue as well (from the table above)? Because right now we are hard-pressed to justify them upgrading from MPX to MP8 given that it does not fix the voice prompt issue I posted in another section. We'd definitely rather upgrade to MP8 (even though it means them buying 2GB more ram for their existing server) than crossgrade to MPX-VT.
08-04-2010 08:07 PM
I would say MP7 or MP8 would be a better option if you're using CUPC 8.
Michael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide