ā08-05-2010 06:17 AM - edited ā03-06-2019 12:20 PM
i have switch 2950 series i install IOS Software (C2950-I6Q4L2-M), Version 12.1(22)EA13 , is that mean that the switch work now at layer 3 , and how can i enable the layer 3 in this switch and how can i show the taype of layer through command prompt
ā08-05-2010 07:02 AM
i have switch 2950 series i install IOS
Software (C2950-I6Q4L2-M), Version 12.1(22)EA13 , is that mean that the
switch work now at layer 3 , and how can i enable the layer 3 in this
switch and how can i show the taype of layer through command prompt
Hi,
Cisco 2950 series switches are layer 2 switches which can have vlan's created and works for layer 2 functionlaity.
Hope to Help !!
Ganesh.H
ā08-05-2010 07:14 AM
Hello,
Irrespective of the image you are running, 2950 switches cannot be configured as Layer 3 devices. It is a hardware limitation by design. When you are using 2950/2900XL/3500XL, you need to have a dedicated Layer 3 device to perform intervlan routing or perform the functionality of a gateway.
Hope this helps.
Regards,
NT
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: