08-05-2010 11:34 AM - edited 03-19-2019 01:21 AM
Hi.
I have a voice infrastructure with CUCMBE and C2821 as a voice gateway.
I have a HS Satellite Modem with a voice appliance.
I need to connect the voice appliance to IP telephony network using a call manager extension. i configure this:
1) Created the extension on the call manager. 3333
2) Created a dial peer on the C2821 to HS satellite Modem. The same extension 3333.
3) Create dial peer on the C2821 to call manager. The same extension 3333.
4) The HN satellite modem connects to C2821 as the voice gateway.
5) Created a route patter on the call manager to the C2821 as voice gateway for this extension.
The configuration is not function
08-05-2010 12:00 PM
Have you tried setting another DN for the otbound?:
) Created a dial peer on the C2821 to HS satellite Modem. The extension 4444.
5) Created a route pattern (4444) on the call manager to the C2821.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
08-05-2010 02:09 PM
I made this, but is the same.
08-05-2010 03:26 PM
You would need to gather a debug voip ccapi inout to understand what/where the call is failing
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide