cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
409
Views
0
Helpful
3
Replies

How to connect a voice appliance with CUCMBE?

jcasasola
Level 1
Level 1

Hi.

I have a voice infrastructure with CUCMBE and C2821 as a voice gateway.

I have a HS Satellite Modem with a voice appliance.

I need to connect the voice appliance to IP telephony network using a call manager extension. i configure this:

1)      Created the extension on the call manager. 3333

2)      Created a dial peer on the C2821 to HS satellite Modem. The same extension 3333.

3)      Create dial peer on the C2821 to call manager. The same extension 3333.

4)      The HN satellite modem connects to C2821 as the voice gateway.

5)      Created a route patter on the call manager to the C2821 as voice gateway for this extension.

The configuration is not function

3 Replies 3

Jaime Valencia
Cisco Employee
Cisco Employee

Have you tried setting another DN for the otbound?:

)   Created a dial peer on the C2821 to HS satellite Modem. The extension 4444.

5)  Created a route pattern (4444) on the call manager to the C2821.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

I made this, but is the same.

You would need to gather a debug voip ccapi inout to understand what/where the call is failing

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: