08-05-2010 04:34 PM - edited 03-16-2019 12:06 AM
Hi Gang,
I've been looking around for information on using the ISR G2's with CCM in SRST mode, is there anything someone can point me to?
Regards,
Mike
Solved! Go to Solution.
08-06-2010 06:27 AM
Cisco Unified Survivable Remote Site Telephony (SRST) does not depend upon Cisco Unified Communications Manager, but supports phone loads. Use the SRST documentation roadmap to determine which phones are supported in each release of Cisco Unified Communications Manager.
Table 60 Cisco Unified Survivable Remote Site Telephony Compatibility with Cisco Unified Communications Manager Release 3.x through Release 8.x
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp56873
CUCM and the phones are really never aware of what SRST version you have, they just know the ISR is SRST enabled and that's all they need to know.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
08-06-2010 06:27 AM
Cisco Unified Survivable Remote Site Telephony (SRST) does not depend upon Cisco Unified Communications Manager, but supports phone loads. Use the SRST documentation roadmap to determine which phones are supported in each release of Cisco Unified Communications Manager.
Table 60 Cisco Unified Survivable Remote Site Telephony Compatibility with Cisco Unified Communications Manager Release 3.x through Release 8.x
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp56873
CUCM and the phones are really never aware of what SRST version you have, they just know the ISR is SRST enabled and that's all they need to know.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide