08-05-2010 11:40 PM
i am in contact with a company having many branches connecting over VPN tunnel and with different IP range in each branch
how can i configure the LMs to discover my switch and my router over VPN
Solved! Go to Solution.
08-07-2010 10:30 AM
LMS 3.0.1 and higher can use non-CDP discovery methods which should be able to find your remotely connected VPN devices. You could use the Ping Sweep or Route Table modules to accomplish what you want.
See https://supportforums.cisco.com/docs/DOC-9005 for more details.
08-07-2010 10:30 AM
LMS 3.0.1 and higher can use non-CDP discovery methods which should be able to find your remotely connected VPN devices. You could use the Ping Sweep or Route Table modules to accomplish what you want.
See https://supportforums.cisco.com/docs/DOC-9005 for more details.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide