asa 5520 want to allow SMPT from inside to outside???

Unanswered Question
Aug 7th, 2010
User Badges:

Can someone please give me an idea how to do this

, I have a program inside that needs to email me reports.inside address to am SMTP on the internet.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Nagaraja Thanthry Sat, 08/07/2010 - 16:14
User Badges:
  • Cisco Employee,


If you do not have an access-list on the inside interface, then it will be

automatically allowed. In order to check if there is an access-list applied

to the inside interface, issue the following command:

sh run access-group

If you see something like "access-group 25

Hope this helps.



pskipton01 Sat, 08/07/2010 - 16:20
User Badges:

I only have an access_outside group what would be the entry to m

ake the inside to out access group?

Kureli Sankar Sat, 08/07/2010 - 16:33
User Badges:
  • Cisco Employee,

That access_outside group is probably applied on the outside interface.  So, there is no ACL applied on the inside interface.  Like Nagaraja said it will be automatically allowed. No need to do anything.



This Discussion