08-08-2010 02:57 AM
How can be Disable the Hold Key feature from Cisco IP Phone 7970 Model .
Solved! Go to Solution.
08-08-2010 02:20 PM
Hi
You can try creating a new softkey set and assigning it to the phones.. assuming a linux CCM:
- First go to Device/Device Settings/Softkey Template
- Copy the current softkey set, give it a new name and save it
- Towards the top right there is a 'Configure Softkey Layout' link; hit 'Go' on that
- Select the 'Connected' state, then move the 'Hold' key out of the 'Selected' softkey box
- You may want to do the same for the other 'Connected...' states
Then assign that template to the phones.
Regards
Aaron
Please rate helpful posts...
08-08-2010 02:20 PM
Hi
You can try creating a new softkey set and assigning it to the phones.. assuming a linux CCM:
- First go to Device/Device Settings/Softkey Template
- Copy the current softkey set, give it a new name and save it
- Towards the top right there is a 'Configure Softkey Layout' link; hit 'Go' on that
- Select the 'Connected' state, then move the 'Hold' key out of the 'Selected' softkey box
- You may want to do the same for the other 'Connected...' states
Then assign that template to the phones.
Regards
Aaron
Please rate helpful posts...
08-09-2010 12:36 AM
Hi
Aaron
Thanks for your feedback, its Helps for me .
I am high appreciated.
Regards
Syed Akbar Ali
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide