cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1617
Views
0
Helpful
25
Replies

pleas frind i need help in switch 2900XL

hi frind

I need help . i have cisco switch 2900 XL , I install new image , but when it reload , this appear for me

flashfs[1]: Initialization complete.
...done Initializing C2900XL flash.
C2900XL POST: System Board Test: Passed
C2900XL POST: Daughter Card Test: Passed
C2900XL POST: CPU Buffer Test: Passed
C2900XL POST: CPU Notify RAM Test: Passed
C2900XL POST: CPU Interface Test: Passed
C2900XL POST: Testing Switch Core: Passed
C2900XL POST: Testing Buffer Table: Passed
C2900XL POST: Data Buffer Test: Passed
C2900XL POST: Configuring Switch Parameters: Passed
C2900XL POST: Ethernet Controller Test: Passed
C2900XL POST: MII Test: Passed
cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K byte
s of memory.

Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2L9S-M), Version 12.0(5)WC17, RELEASE SOFT
WARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 13-Feb-07 15:28 by antonino
00:00:31: %IMAGE_MISMATCH-3-MALIBU_IMAGE_MISMATCH:
LRE firmware not supported by switch hardware.
Please download a non-LRE image.

what is that , and what is the correct imag (.bin) to install in it

regards ...

25 Replies 25

Nagaraja Thanthry
Cisco Employee
Cisco Employee

Hello,

What is the image (full image name) you are trying to load to the switch?

You should be using c2900xl-c3h2s-mz.120-5.WC17.bin. I guess you might have

downloaded c2900xl-c3h2l9s-mz.120-5.WC17.bin which is for LRE switches.

Hope this helps.

Regards,

NT

dear frind ...

I am very grateful  for you're help , yes i downloaded this image (c2900xl-c3h2l9s-mz.120-5.WC17.bin) ,

so i will tray to download the new image ,

hint

can you tell me how i can know the correct image i must download

regards

Hello,

You should look for C2900 IOS image (without keyword LRE). Here is the link

for the latest image:

http://tinyurl.com/2dnsvy8

Hope this helps.

Regards,

NT

Dear


when i inter u'r link this appear for me


no item found

can help me

regards ..



Hello,

Please try this link:

http://tinyurl.com/5fj9e8

Regards,

NT

ok dear

i am very grateful for u'r response , can u tell me which file from this site i choice

thank you

Hello,

c2900xl-c3h2s-mz.120-5.WC17.bin should work.

Regards,

NT

ok dear ..

i will try and tell u

regards

Nagaraja Thanthry
Cisco Employee
Cisco Employee

To add to my earlier post, c2900xl-c3h2l9s-mz.120-5.WC17.bin is C2900XL LRE

IOS IMAGE where as you need C2900 IOS IMAGE (if you are downloading it from

Cisco Site, it is 3rd one from the top I believe).

Hope this helps.

Regards,

NT

dear i downlad this image

c2900xl-c3h2l9s-mz.120-5.WC17.bin

but this error apear


Initializing C2900XL flash...
flashfs[1]: 2 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 3612672
flashfs[1]: Bytes used: 1933312
flashfs[1]: Bytes available: 1679360
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
...done Initializing C2900XL flash.
C2900XL POST: System Board Test: Passed
C2900XL POST: Daughter Card Test: Passed
C2900XL POST: CPU Buffer Test: Passed
C2900XL POST: CPU Notify RAM Test: Passed
C2900XL POST: CPU Interface Test: Passed
C2900XL POST: Testing Switch Core: Passed
C2900XL POST: Testing Buffer Table: Passed
C2900XL POST: Data Buffer Test: Passed
C2900XL POST: Configuring Switch Parameters: Passed
C2900XL POST: Ethernet Controller Test: Passed
C2900XL POST: MII Test: Passed
cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K byte
s of memory.
Processor board ID FAB0345Y0N9, with hardware revision 0x01
Last reset from warm-reset

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:30:94:63:0B:C0
Motherboard assembly number: 73-3382-07
Power supply part number: 34-0834-01
Motherboard serial number: FAB034466K0
Power supply serial number: DAB03352M83
Model revision number: A0
Model number: WS-C2924-XL-A
System serial number: FAB0345Y0N9


Press RETURN to get started!


C2900XL INIT: Complete

00:00:21: %LRE_UPGRADE-4-INIT_RESOURCE: cannot locate lre firmware files
00:00:29: %SYS-5-CONFIG: Configured from NVRAM by console
00:00:31: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2L9S-M), Version 12.0(5)WC17, RELEASE SOFT
WARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 13-Feb-07 15:28 by antonino
00:00:31: %IMAGE_MISMATCH-3-MALIBU_IMAGE_MISMATCH:
LRE firmware not supported by switch hardware.
Please download a non-LRE image.

where the problem

regards ..

Hello,

The image you downloaded has "l9" which means it is for LRE platform. Download the image that does not have "l9" in its name.

Regards,

NT

dear all

i install new image in the problem still the same , please frind where the problem , i realy need help

thank you ...

what is happen no buddy can help me

to resolve my problem ???????

   You should only be using this image .  c2900xl-c3h2s-mz.120-5.WC17.bin .    Verify  this image is in flash. Do a dir flash:  .  Did you set your boot statement once you downloaded the image ?    "boot system flash:c2900xl-c3h2s-mz.120-5.WC17.bin .  Then do a write mem  command and reload.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: