08-08-2010 08:34 AM - edited 03-06-2019 12:22 PM
hi frind
I need help . i have cisco switch 2900 XL , I install new image , but when it reload , this appear for me
flashfs[1]: Initialization complete.
...done Initializing C2900XL flash.
C2900XL POST: System Board Test: Passed
C2900XL POST: Daughter Card Test: Passed
C2900XL POST: CPU Buffer Test: Passed
C2900XL POST: CPU Notify RAM Test: Passed
C2900XL POST: CPU Interface Test: Passed
C2900XL POST: Testing Switch Core: Passed
C2900XL POST: Testing Buffer Table: Passed
C2900XL POST: Data Buffer Test: Passed
C2900XL POST: Configuring Switch Parameters: Passed
C2900XL POST: Ethernet Controller Test: Passed
C2900XL POST: MII Test: Passed
cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K byte
s of memory.
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2L9S-M), Version 12.0(5)WC17, RELEASE SOFT
WARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 13-Feb-07 15:28 by antonino
00:00:31: %IMAGE_MISMATCH-3-MALIBU_IMAGE_MISMATCH:
LRE firmware not supported by switch hardware.
Please download a non-LRE image.
what is that , and what is the correct imag (.bin) to install in it
regards ...
08-08-2010 08:43 AM
Hello,
What is the image (full image name) you are trying to load to the switch?
You should be using c2900xl-c3h2s-mz.120-5.WC17.bin. I guess you might have
downloaded c2900xl-c3h2l9s-mz.120-5.WC17.bin which is for LRE switches.
Hope this helps.
Regards,
NT
08-08-2010 08:55 AM
dear frind ...
I am very grateful for you're help , yes i downloaded this image (c2900xl-c3h2l9s-mz.120-5.WC17.bin) ,
so i will tray to download the new image ,
hint
can you tell me how i can know the correct image i must download
regards
08-08-2010 09:03 AM
Hello,
You should look for C2900 IOS image (without keyword LRE). Here is the link
for the latest image:
http://tinyurl.com/2dnsvy8
Hope this helps.
Regards,
NT
08-08-2010 09:43 AM
08-08-2010 09:48 AM
Hello,
Please try this link:
http://tinyurl.com/5fj9e8
Regards,
NT
08-08-2010 09:53 AM
ok dear
i am very grateful for u'r response , can u tell me which file from this site i choice
thank you
08-08-2010 09:59 AM
Hello,
c2900xl-c3h2s-mz.120-5.WC17.bin should work.
Regards,
NT
08-08-2010 10:04 AM
ok dear ..
i will try and tell u
regards
08-08-2010 08:45 AM
To add to my earlier post, c2900xl-c3h2l9s-mz.120-5.WC17.bin is C2900XL LRE
IOS IMAGE where as you need C2900 IOS IMAGE (if you are downloading it from
Cisco Site, it is 3rd one from the top I believe).
Hope this helps.
Regards,
NT
08-08-2010 09:17 AM
dear i downlad this image
c2900xl-c3h2l9s-mz.120-5.WC17.bin
but this error apear
Initializing C2900XL flash...
flashfs[1]: 2 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 3612672
flashfs[1]: Bytes used: 1933312
flashfs[1]: Bytes available: 1679360
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
...done Initializing C2900XL flash.
C2900XL POST: System Board Test: Passed
C2900XL POST: Daughter Card Test: Passed
C2900XL POST: CPU Buffer Test: Passed
C2900XL POST: CPU Notify RAM Test: Passed
C2900XL POST: CPU Interface Test: Passed
C2900XL POST: Testing Switch Core: Passed
C2900XL POST: Testing Buffer Table: Passed
C2900XL POST: Data Buffer Test: Passed
C2900XL POST: Configuring Switch Parameters: Passed
C2900XL POST: Ethernet Controller Test: Passed
C2900XL POST: MII Test: Passed
cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K byte
s of memory.
Processor board ID FAB0345Y0N9, with hardware revision 0x01
Last reset from warm-reset
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:30:94:63:0B:C0
Motherboard assembly number: 73-3382-07
Power supply part number: 34-0834-01
Motherboard serial number: FAB034466K0
Power supply serial number: DAB03352M83
Model revision number: A0
Model number: WS-C2924-XL-A
System serial number: FAB0345Y0N9
Press RETURN to get started!
C2900XL INIT: Complete
00:00:21: %LRE_UPGRADE-4-INIT_RESOURCE: cannot locate lre firmware files
00:00:29: %SYS-5-CONFIG: Configured from NVRAM by console
00:00:31: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2L9S-M), Version 12.0(5)WC17, RELEASE SOFT
WARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 13-Feb-07 15:28 by antonino
00:00:31: %IMAGE_MISMATCH-3-MALIBU_IMAGE_MISMATCH:
LRE firmware not supported by switch hardware.
Please download a non-LRE image.
where the problem
regards ..
08-08-2010 09:21 AM
Hello,
The image you downloaded has "l9" which means it is for LRE platform. Download the image that does not have "l9" in its name.
Regards,
NT
08-08-2010 11:51 AM
dear all
i install new image in the problem still the same , please frind where the problem , i realy need help
thank you ...
08-08-2010 01:28 PM
what is happen no buddy can help me
to resolve my problem ???????
08-08-2010 01:48 PM
You should only be using this image . c2900xl-c3h2s-mz.120-5.WC17.bin . Verify this image is in flash. Do a dir flash: . Did you set your boot statement once you downloaded the image ? "boot system flash:c2900xl-c3h2s-mz.120-5.WC17.bin . Then do a write mem command and reload.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide