08-08-2010 09:43 PM - edited 03-04-2019 09:21 AM
Hi
I have a router 2800, The problem is high CPU utilization especially for "check heap" My question is, hardware failure? Like the memory... or need change the router
Find information about the topic but I do not understand ...
Check heaps: Checks the memory every minute. It forces a reload if it finds processor corruption.
Thank you
Solved! Go to Solution.
08-09-2010 08:23 PM
John,
Most of the CPU is being used by interrupts.
CPU utilization for five seconds: 70%/68%; one minute: 70%; five minutes: 70%
From this, 68% is being used by interrupts.
Take a look at the link below and check the steps mentioned.
http://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a00801c2af0.shtml
08-08-2010 10:06 PM
How high is your CPU utilization? Can you post a 'show proc cpu', 'show proc cpu history' and 'show ver'
08-09-2010 08:12 PM
08-09-2010 08:23 PM
John,
Most of the CPU is being used by interrupts.
CPU utilization for five seconds: 70%/68%; one minute: 70%; five minutes: 70%
From this, 68% is being used by interrupts.
Take a look at the link below and check the steps mentioned.
http://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a00801c2af0.shtml
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: