RIP Network Advertise??

abhi-adte · ‎08-09-2010

Hi,

I have 3 Router connected via Serial interface i.e. R1 , R2 and R3 now I want to Network Advertise in unicast from Router R1 to R3 without using following things how I can do pls help me..

neighbor command/ PBR/ Static or Default Route/ Redisribution.

Giuseppe Larosa · ‎08-09-2010

Hello Abnhinay,

what about running RIP over a point to point GRE tunnel between R1 and R3?

Hope to help

Giuseppe

abhi-adte · ‎08-09-2010

sir,

sorry in last qus. i forget to mention Tunnel also. we cant use tunneling. any another one..plsss

Tharak Abraham · ‎08-09-2010

If unicasting is not a contraint between R's, then we could use ip multicast helper-map..-:)

abhi-adte · ‎08-10-2010

Hi,

I got it its working via below steps:

If any query pls revert once..

!
interface Serial0/0
ip address 10.10.10.1 255.255.255.0
ip nat outside
ip virtual-reassembly
serial restart-delay 0
clock rate 64000
!
!
!
!
router rip
version 2
network 1.0.0.0
network 10.0.0.0
!

ip nat outside source static udp 12.12.12.2 520 224.0.0.9 520 extendable
!
!