08-09-2010 08:51 PM - edited 03-16-2019 12:09 AM
Hi,
When a call is set from PSTN and nobody answer on phone connected to FXS port if the calling party off hooks the phone the phone connected on FXS port remains more than 40 seconds ringing.
I have checked several post about this but no success up to now.
for the moment I tried the following option
voice-port 0/3/1
disconnect-ack
cptone MX
timeouts call-disconnect 0
timeouts wait-release 1
description FAX 1190
any config that have been confirmed it works fine?
regards
08-10-2010 05:25 AM
Prom PSTN how ? FXO? PRI? E1 R2?
08-10-2010 09:24 AM
Hi,
From PSTN by means of E1 R2 telmex
this is my config of E1
network-clock-participate wic 0
!
controller E1 0/0/0
framing NO-CRC4
ds0-group 1 timeslots 1-15 type r2-digital r2-compelled ani
cas-custom 1
country telmex
category 2
answer-signal group-b 1
caller-digits 4
regards
08-10-2010 09:40 AM
Check with "debug vpm signal" that when the calling party hangs up, the router is made aware and can tear down the call to FXS.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: