This is my first Cisco router and am having troubles setting it up to remote desktop and remote web workplace firewall rules to work with my SBS server.
I have setup an IP alias with a static IP through our ISP. I have setup custom services of RDP with UDP port of 3389 and RWW with TCP port of 4125.
I setup rules in the firewall to allow these, here is an example for the RPD
|From Zone:||SECURE (LAN) INSECURE (Dedicated WAN/Optional WAN) DMZ|
|To Zone:||SECURE (LAN)DMZ|
|Service:||ANY AIM BGP BOOTP_CLIENT BOOTP_SERVER CU-SEEME:UDP CU-SEEME:TCP DNS:UDP DNS:TCP FINGER FTP HTTP HTTPS ICMP-TYPE-3 ICMP-TYPE-4 ICMP-TYPE-5 ICMP-TYPE-6 ICMP-TYPE-7 ICMP-TYPE-8 ICMP-TYPE-9 ICMP-TYPE-10 ICMP-TYPE-11 ICMP-TYPE-13 ICQ IMAP2 IMAP3 IRC NEWS NFS NNTP PING POP3 PPTP RCMD REAL-AUDIO REXEC RLOGIN RTELNET RTSP:TCP RTSP:UDP SFTP SMTP SNMP:TCP SNMP:UDP SNMP-TRAPS:TCP SNMP-TRAPS:UDP SQL-NET SSH:TCP SSH:UDP STRMWORKS TACACS TELNET TFTP RIP IKE SHTTPD IPSEC-UDP-ENCAP IDENT VDOLIVE SSH SIP-TCP SIP-UDP RDP RWW RDP-TCP|
|Action:||BLOCK always ALLOW always BLOCK by schedule ALLOW by schedule|
|Source Hosts:||Any Single Address Address Range|
|Destination Hosts:||Any Single Address Address Range|
|QoS Priority:||Normal-Service Minimize-Cost Maximize-Reliability Maximize-Throughput Minimize-Delay|
|Source NAT Settings|
|External IP Address:||WAN Interface Address Single Address||Single Address IP:||-->|
|WAN Interface:||Dedicated WAN - 22.214.171.124 Dedicated WAN - 126.96.36.199|
|Destination NAT Settings|
|Internal IP Address:|
|Enable Port Forwarding:|
|Translate Port Number:|
|External IP Address:||Dedicated WAN Optional WAN Dedicated WAN - 188.8.131.52 Dedicated WAN - 184.108.40.206|
I still cannot get remote destop or the RWW to work. Any help would be greatly appreciated!