We upgraded our CUPS 7.0(5) to 8.0(2) and our client from CUPC 7 to 8.
Everything is working fine but I noticed something very strange.
When placing call in softphone mode from CUPC 8 to an other phone, the call is placed and connection established, but from CUPC point of view, he always show me that I'm running a conference call. The first part is Myself, the second part is the called number and the third part is Myself again.
It's very strange and it happens on every CSF client we tested (5 different account).
I already tried to restart CUCM (7.1(5)) and CUPS without success.
Please look at the screenshot attached.
Thanks for your help
OK, maybe I missed something, but I did see this in the CUPC 8.0 release notes:
Using Address Translation Patterns Instead of Application Dialing Rules
Cisco Unified Personal Communicator is easiest to install with Cisco Unified Communications Manager Release 7.0 or later, although you can install it with Cisco Unified Communications Manager Release 6.1(3) or later.
Cisco Unified Communications Manager Release 7.0 and later support +E.164 phone numbers. Cisco recommends that you use +E.164 phone numbers with Cisco Unified Personal Communicator, so that outgoing calls are easier to set up.
If you are using Cisco Unified Communications Manager Release 7.0 or later, Cisco recommends that you use address translation patterns to set up outbound calls, rather than application dialing rules.
If you use application dialing rules, you must apply a Cisco Options Package (COP) file. You must restart Cisco Unified Communications Manager services when you update the rules. If you use address translation patterns, the rules are dynamically applied, and you do not need to restart services.
Does this not fit your problem, if not sorry, was trying to help.