%WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost keepalives from Cat 6K Supervisor.

Answered Question
Aug 11th, 2010

hi

i did upgrade to WiSM from v5.1 to V6 then i see this log

%WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1763 Lost keepalives from Cat 6K Supervisor.
please advice

I have this problem too.
0 votes
Correct Answer by Leo Laohoo about 3 years 8 months ago

Upgrade to 7.X as per Cisco recommendations.

  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 5 (1 ratings)
ahmedalshami Thu, 08/12/2010 - 04:00

hi leola ,
also the Emergency version is  v5.1 do I need to upgrade it (if possible to new v)

please advice

Leo Laohoo Thu, 08/12/2010 - 15:22

Cisco, for the past few months (more than 6 months), has been recommending everyone to stay away from the 5.X code.  Some of us in the NetPro forums has considered this version to be the "lost-cause".

There is no such thing as a "stable" code.  There is, however, a code with fewer bugs.  7.X is the way to go. 

don.click1 Wed, 09/21/2011 - 06:39

I have been on the 7.0.116.0 for a while, and recently upgraded my Sup 720's to 12.2(33)SXJ1, and have started seeing these messages.

Can we get something other than "upgrade" on this?

jonas@cisco Thu, 04/25/2013 - 06:58

I know this is an old thread but I have just upgraded a WiSM2 to version 7.4.110.0 in a Cat6509E and I am getting this same log continuously.  Wireless services seem to be woring ok with the exception of very few clients spontaneously disconnecting at random intervals.

*wcpTask: Apr 25 14:15:28.386: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:14:28.370: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:13:28.354: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:12:28.338: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:11:28.322: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:10:28.306: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

*wcpTask: Apr 25 14:09:28.290: #WCP-3-KEEPALIVE_LOST: wcp_controller_server.c:1833 Lost keepalives from Cat 6K Supervisor.

Would love to know if I need to react to this message.

Actions

Login or Register to take actions

This Discussion

Posted August 11, 2010 at 1:43 AM
Stats:
Replies:6 Avg. Rating:5
Views:1127 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard