1841 HWIC Card

Unanswered Question

Hi,

Wanted to know how much HWIC card we can have in 1841 modular router.

Presently we are using 2 FE and 4 Serial interfaces.

I don't have the physical access of the router but do have sh tech with me.

I assume all slots are occupied and nothing can be added to this.

Expert opinion on this.

Please find attached the Sh tech.

Reg,

Sushil

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rtjensen4 Wed, 08/11/2010 - 06:12

Hello,

The 1841 has two WIC slots as well as two built-in Fe ports. Looking at the "Show inventory" out of the show tech you provided, it shows that there is a serial card in both of the available expansion slots. It looks like the router is filled-up.

------------------ show inventory ------------------

NAME: "1841 chassis", DESCR: "1841 chassis, Hw Serial#: 336740761, Hw Revision: 7.0"
PID: CISCO1841         , VID: V05 , SN: FHK112516M7

NAME: "C1841 Motherboard with 2 Fast Ethernet", DESCR: "C1841 Motherboard with 2 Fast Ethernet"
PID: CISCO1841         , VID: 7.0, SN: FHK112516M7

NAME: "WIC/HWIC 0", DESCR: "WAN Interface Card - Serial 2T"
PID: WIC-2T=           , VID: 1.0, SN: 24046985 

NAME: "WIC/HWIC 1", DESCR: "WAN Interface Card - Serial 2T"
PID: WIC-2T=           , VID: 1.0, SN: 32986640

Actions

This Discussion