If the goal of the ping sweep is to see all the hosts on a particular subnet then the router arp table is a valuable resource.

Ping the broadcast address; then view the arp table.  For example if the subnet in question is 192.168.1.0/24; then ping 192.168.1.255 from the router.  Then execute a

show arp | inc 

  The results should be all mac/IP addresses on that subnet.

Chris

You can try a TCL script like the following. Assuming your network is 10.1.1.0/24 (.1-.254)

tclsh

for {set i 1} {$i <= 254} {incr i} {
set var 10.1.1.
append var $i
ping $var rep 3 time 1}




ROUTER(tcl)#tclquit

Remember to use tclquit to exit the TCL prompt.

HTH,

jerry