cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1956
Views
0
Helpful
4
Replies

%ALIGN-3-TRACE: -Traceback=

smartboy2255
Level 1
Level 1

HI,

  I am Getting following error in Cisco 3700 Router with IOS 12.3 (26).We dont have any option to upgrade IOS since this is the only available IOS in the particular feature Set.What could be cause of this particular error...

%ALIGN-3-TRACE: -Traceback= 609BEFC4 609BF9A4 609C01C0 60992D64 60993310 00000000 000

00000 00000000

%ALIGN-3-CORRECT: Alignment correction made at 0x609BEFE4 writing 0x4722BDAB

4 Replies 4

kahamid
Cisco Employee
Cisco Employee

Can you please attach "show version" from device here so I can decode tracebacks.

Thanks

Kashif

HI,

PLs find the show version of Router

sh ver

Cisco Internetwork Operating System Software

IOS (tm) 3700 Software (C3745-IK9S-M), Version 12.3(26), RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by cisco Systems, Inc.

Compiled Mon 17-Mar-08 17:42 by xyz

ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

ISDN-POOL-RTR uptime is 3 week, 4 days, 10 hours, 41 minutes

System returned to ROM by power-on

System restarted at 10:21:59 IST Sun Aug 1 2010

System image file is "flash:c3745-ik9s-mz.123-26.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco 3745 (R7000) processor (revision 2.0) with 111616K/19456K bytes of memory.

Processor board ID JPE080313AA

R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2, 2048KB L3 Cache

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

Primary Rate ISDN software, Version 1.1.

2 FastEthernet/IEEE 802.3 interface(s)

62 Serial network interface(s)

2 Channelized E1/PRI port(s)

DRAM configuration is 64 bits wide with parity disabled.

151K bytes of non-volatile configuration memory.

31360K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2102

This is an alignment error followed by a correction. How often are you seeing this error? Is it disrupting service? Can you post a 'sh log' ?

u1kumar2002
Level 1
Level 1

Hi,

     As per my understanding... This is a log output for a spurious access. Plz check the document. It is related to software.

http://cisco.biz/en/US/products/sw/iosswrel/ps1828/products_tech_note09186a00800a65d1.shtml

Uttam

http://www.startnetworks.blogspot.com/

Review Cisco Networking products for a $25 gift card