08-12-2010 06:37 AM - edited 03-16-2019 12:12 AM
Hi guys,
I have CUCM cluster with three nodes, three diferent devices pools and different regions, only g.711 is being used.
When i start a conference using cnfr button from 7911 phone the first call stays in stand by and the new call is on, then i press cnfr again i the call is dropped.
I have sw conference bridge configured in CUCM.
Do i need conference hardware resources for three or more users?
Thanks.
Regards,
NC
08-12-2010 06:41 AM
No, have you tried restarting the IPVMS?
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
08-12-2010 06:53 AM
HI javalenc ,
Yes, i try that without success
I have two button (conference and participate) i try everything and nothing works.
08-12-2010 07:00 AM
If you try a meet-me does it work?
Just to confirm the CFB is up and running
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
08-12-2010 07:15 AM
I have configured a meet-me number but only the first phone can dial the number, the Second receives a unavailable tone.
08-12-2010 07:39 AM
OK, i can do conferenre if the phone is in the same location!
The meet me is not working because the meet me number only accepts one number.
08-12-2010 07:41 AM
Do you have CAC configured?
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
08-12-2010 08:12 AM
No.
One external number can successefully join the conference.
Only internal different location phones are not working.
08-12-2010 08:20 AM
The scenario is like this:
3 servers
3 sites
3 device pools
1 resource group per site
1 resource list per site
each resource list have 3 resource groups ordered
Meet me number only accept one phone call the second receives a unavailable tone
Ad Hoc conference works for external numbers and internal numbers in the same location, with the same device pool.
Each site can call successefully to another because each site have CSS for external and internal calls.
I have one cfb configured automatically for each site, with local device pool and location.
What i am missing here?
08-12-2010 08:57 AM
If i change the region and set the same region for all the participants everything works for ad hoc conference :|
08-12-2010 09:20 AM
Meet me is not working yet.
Ad hoc conference is working, i change the default values from region to use g.711 for the three sites...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide