I have been experiencing an extremely odd issue with a couple of my AP541Ns, I configure the APs to use 5Ghz Wireless-N and then set the channel to 100 and leave it, I then come back and access the APs an hour or so later and the APs are now using a different random channel each. I have tried flashing them with the latest firmware and restoring the factory settings however so far that has not helped. I am currently running all five of the APs in 2.4Ghz Wireless-N mode and have so far not had any issues with the channel changing, it has remained constant at 1 for the past several hours. I must also mention that I am using all of the APs in WDS. I would appreciate any help.